PRYME 6" Flap Wheel (180 Grit, 1/2" Center Hole)
Removing scratches has never been easier! If you're going for a custom look, the Pryme flap wheel works great for sanding away casting lines too. This wheel has fiber pad in between flaps of sandpaper for smooth and effective material removal.
- Mounts on a bench grinder / buffing machine
- 6" diameter
- 1" wide
- Offered in grits of 80, 180, and 320
- Use 80 grit for blending in deep scratches and removal of casting material, 180 grit for light scratches, and 320 grit as a finishing wheel
- Creates a consistent finish, with very little waves or warping
- Leaves behind a brushed look, can be further finished with Pryme Cleaning Wheels
- Best for aluminum, but can be used on steel, stainless steel, and brass with great results too (steel and brass must be coated afterwards to prevent rust and corrosion)
- Works great for paint preparation too
- Max RPM: 3600
- Available for 1/2" (12.7mm), 5/8" (16mm), and 3/4" (19mm) buffer shaft sizes
- Sold individually or in a pack of 3 to save you some cash!
Click on "Video" tab to see the wheel in use.
Buffer motor or stand not included
Always wear a dust mask or respirator and proper eye protection while buffing!
Related Items:
The Wheel Flange Set keep the wheels securely in place.
Space the wheels away from the machine with a Wheel Spacer.
These wheels are designed to be used on a buffing machine or bench grinder. They can be used on a machine with a 1/2", 5/8", or 3/4" shaft. For a buffing machine, you'll want at least a 1/2 HP motor that spins at 3000 RPM. One with an extended shaft is best, so you have lots of clearance to buff your parts. If you'll be doing lots of buffing, opt for a 3/4 HP motor.
Machine Reccomendations:
2 Speed 3/4 HP Baldor Buffer (will last a lifetime)
If you have a machine but need the big washers that hold the wheels in place Click Here
To space the wheels away from the machine for more clearance Click Here
To extend the shaft on your buffer Click Here
To use the wheels on a drill Click Here
Whenever you're doing any sort of grinding or sanding you'll want to use eye and respiratory protection. Trust us, you do not want to be breathing in metal particles! At the bare minimum, wear a dust mask and glasses.
A great product for protecting yourself is this respirator Click Here
Alternatively, this is also a great respirator to pair up with safety glasses Click Here
Use these filters with the previously mentioned respirators Click Here
If you're doing lots of buffing, it's recommended to get some sort of ventilation like this exhaust fan that we use Click Here
| SKU | 6Flap18012 |
| Brand | Prymemx |
| Shipping Weight | 0.3000kg |
| Shipping Width | 0.100m |
| Shipping Height | 0.100m |
| Shipping Length | 0.100m |
Be The First To Review This Product!
Help other Garage Eleven users shop smarter by writing reviews for products you have purchased.
