PRYME ROUGH CLEANING WHEEL 6"
For those of you looking to smooth out scratches, scrapes, or casting lines, the Pryme rough grade wheel is the ticket! Also works great for removal of rust, corrosion, and paint. After using this wheel you'll want to buff out everything in sight, so I'd recommend grabbing a few wheels for safe measure. Available in 4", 6", and 8" diameter.
- Mounts on a bench grinder / buffing machine, but can be used on a drill as well.
- Comparable to 180 grit sandpaper.
- 3/8" thick x 1/2" center hole (can be used on 1/2" (12.7mm), 5/8" (16mm), and 3/4" (19mm) buffer shafts, just thread the wheel onto the shaft).
- Can be used on aluminum, steel, stainless steel, and brass with great results (steel and brass must be coated afterwards to prevent rust and corrosion).
- Works best for scratch removal and aggressive sanding, for final finish use the Pryme Fine Cleaning Wheel.
- Works great for paint preparation too.
- Max RPM: 3600.
- Sold individually or in a pack of 3, 5, or 10 to save you some cash!
- Proudly made in the USA.
- The larger the wheel, the longer it will last. The smaller wheels work better in tighter areas however and also cost a bit less.
Click on "Video" tab to see the wheel in use.
-Buffer motor or stand not included
-Always wear a dust mask or respirator and proper eye protection while buffing!
Related Items:
The Wheel Flange Set keeps the wheel securely in place.
Space the wheel away from the machine with a Wheel Spacer.
These wheels are designed to be used on a buffing machine or bench grinder. They can be used on a machine with a 1/2", 5/8", or 3/4" shaft. For a buffing machine, you'll want at least a 1/2 HP motor that spins at 3000 RPM. One with an extended shaft is best, so you have lots of clearance to buff your parts. If you'll be doing lots of buffing, opt for a 3/4 HP motor.
Machine Reccomendations:
2 Speed 3/4 HP Baldor Buffer (will last a lifetime)
If you have a machine but need the big washers that hold the wheels in place Click Here
To space the wheels away from the machine for more clearance Click Here
To extend the shaft on your buffer Click Here
To use the wheels on a drill Click Here
Whenever you're doing any sort of grinding or sanding you'll want to use eye and respiratory protection. Trust us, you do not want to be breathing in metal particles! At the bare minimum, wear a dust mask and glasses.
A great product for protecting yourself is this respirator Click Here
Alternatively, this is also a great respirator to pair up with safety glasses Click Here
Use these filters with the previously mentioned respirators Click Here
If you're doing lots of buffing, it's recommended to get some sort of ventilation like this exhaust fan that we use Click Here
| SKU | 6RoughCleaningWheel |
| Brand | Prymemx |
| Shipping Weight | 0.3000kg |
| Shipping Width | 0.100m |
| Shipping Height | 0.100m |
| Shipping Length | 0.100m |
Be The First To Review This Product!
Help other Garage Eleven users shop smarter by writing reviews for products you have purchased.
